The art of Manufacturing Machines Since 1990
contact@bhagwatipharma.com +91-6353688292

Homogenizer for 300L cap with Pneumatic Lifting stand
Manufacturers & Exporters

Homogenizer for 300L cap with Pneumatic Lifting stand Preview

Homogenizer for 300L cap with Pneumatic Lifting stand
Send Enquiry See Our Clients

APPLICATION:

Homogenizer is paraphernalia that assist in the method of homogenizing. The major job of a homogenizer is to form a consistent arrangement of all solid materials present in the heavy material. A homogenizer also breaks down large water particle into small homogenous structure, resultant in an emulsion consisting of water molecules extend evenly all through the whole liquid.

Homogenizer mostly works by agitating the fluid that is to be homogenized. Agitation can be done by using an automatic agreement which pumps the liquid through an orifice plate. Agitation can also be done by an acoustic medium which uses ultrasonic regularity to agitate a surface over which the liquid is pumped.

Homogenization (known in the pharmaceutical industry as micronization) is the method of reduce the particle sizes of pharmaceutical goods, under very high pressures, sheer, turbulence, increase of rate and impact, to make them more stable and clinically effective. The bioavailability of the manufactured goods increases and the tolerance of some or else borderline drugs can get better. It can mostly use for pharmaceutical, chemical, food, cosmetics and alike industries.

At Shree Bhagwati , We design and manufacture a wide range of agitators for liquids and Paste for all process in the pharmaceutical, chemical, food, cosmetics and similar industries. Agitators are provided with different types of agitation components for process such as mixing, blending, dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid.

Agitators are designed and adapted to any vessel shape and can be implemented with or without lower support. Different types of blades can be combined depending on the process requirements. The sealing system are designed and adapted depending on the requirement of the various process and start from simple retainers to double mechanical seals. Agitators are available with different type of mounting as per suitability of the process and users requirements.

Different types of blades can be combined depending on the process requirements and various conditions including the stirring objective, tank shape, rotating speed, viscosity, mixing blades of different configurations should be applied for different operating objectives. Different mixing blades follow various specifications to design and select the configurations of the blades. The ratio of the blade to the inner diameter of the tank, angular speed of the blade top, viscosity change during mixing process and the range of the flow volume are the factors to be considered. There are various types of blade mixer and can be categorized into axial flow and radial flow according to the flow pattern of the fluid in the tank. The main factors affecting mixing performance are as below and the commonly used configurations are listed for reference:

Agitators available with different type of drives and speeds with direct motor and with gear drive as per process requirements. Agitators are suitable for mixing volumes 5 liters to 10,000 liters.

TECHNICAL SPECIFICATION:

DESCRIPTION

SPECIFICATIONS

DUTY

Emulsification of Liquid – Liquid

MOUNTING

Vertical

MODEL

GMP

WORKING VOLUME

50 to 10,000 Ltrs

OPERATING TEMPERATURE

80 Deg.

BULK DENSITY / VISCOSITY

CTC

TYPE

Rotor – Stator type

DRIVE MOTOR

3.0 HP / 2800 RPM / 3Ph / 415 VAC / 50 Hz/ Non FLP

HOMOGENIZER RPM

500 – 2800 Variable

Shaft Dia.

35 MM

CONTACT PARTS MOC

SS 316

NON CONTACT PARTS MOC

SS 304

HEIGHT ADJUSTMENT

By means of worm and worm wheel

MAX. HEIGHT ADJUSTMENT

400 mm

CONTROL PANEL

SS 304 Operating panel shall be provided with require controls

FINISH

All product contact parts shall be polished to 220 grit mirror polish. Non contact parts shall be polished to 180 grit matt finish.

Salient Features :

Homogenizer for 300L cap with Pneumatic Lifting stand

Homogenizer for 300L cap with Pneumatic Lifting stand

Stirrer-Propeller blade for 300L cap with Manual Lifting & tilting stand

Stirrer-Propeller blade for 300L cap with Manual Lifting & tilting stand

Stirrer-Propeller blade for 50L & 10 L cap with VFD & Manual lifting stand

Stirrer-Propeller blade for 50L & 10 L cap with VFD & Manual lifting stand

Homogenizer for 500L cap with telescopic stand

Homogenizer for 500L cap with telescopic stand

Propeller Stirrer
high shear rivers flow homogenizer
High Shear Homogenizer- Rotor- Stator type

High Shear Homogenizer- Rotor- Stator type

Propeller Blade Stirrer mounted on top disc / Bottom Disc of Tank or vessels

Propeller Blade Stirrer mounted on top disc / Bottom Disc of Tank or vessels

Different type mixing blade design

Different type mixing blade design

ISO Certifications

15 Offices Worldwide
150 Hardworking People
4000 Worldwide Installations
25 Years Of Experience

Contact Us

Address: 9/1, Bhagyoday Estate, Opp. Rakhial Smashan Gruh, Uttam Dairy Road, Rakhial, Ahmedabad - 380 023 Gujarat, India

Call Us

Mobile No.: +91 9099935526 - Mr. Arjun Rao
Phone No.: + 91 79 22770475 / 22730075
Fax No.: +91 79 22770475
contact@bhagwatipharma.com
Website: www.ointmentplant.net

Top Option available for Explosion proof motor and controls panel