Salient Features :
Optional Features:
TECHNICAL SPECIFICATION:
MODEL |
Total Volume |
Working Volume |
SBMNM-500 |
500 |
300 |
SBMNM -1000 |
900 |
540 |
SBMNM -2000 |
1800 |
1080 |
SBMNM -4000 |
3500 |
2100 |
SBMNM -5000 |
5500 |
3300 |
Safety Features:
APPLICATION:
The Nauta Cone screw mixer is normally used in case of applications that involve gentle mixing action and minimal heat generation with no any product deformation. The Nauta Mixer is idyllic mixer to mix a variety of small lots to make standardized one batch or to mix many large size of powder to a standardized product in Food, Chemical Pharmaceutical, Minerals, Guar Gum, Starch and Cellulose. The Nauta mixer offers low functioning cost than any other types of mixers.
The Nauta mixer is a planetary rotating screw near the wall of cone with no end resting of screw. The standard of blending is based on the differential travel speeds of product particles in the conical division of the vessel. The material from the bottom section of vessel is lifted by the screw and spread over the upper section. The screw protester turning on its axis produces a lifting action as it spirals the material in a rising flow. At the same time the screw orbit the tank, the screw remove material away from wall and deflect it into the centre of the tank setting up a spiral current consideration of the batch. The material lifted by the screw gravitates downwards systematically intermixing with material being spiralled upward. This results in most intimate mixture of all ingredients.
The nauta mixer is mixes the powder but also breaks the lumps. This blender/mixer can also be used for application that requires high shear mixing, which can be consummate using individually driven lump breakers.
CONE SCREW MIXER
NAUTRA MIXER